The Ordyn-1230 is a carrier class second generation SDH product using state of the art technology to integrate Add Drop Multiplexer (ADM), Terminal Multiplexer (TM) and Regenerator (REG) with STM-1 Interfaces, used for junction & regional telecommunication transmission networks based on the most recent standards & recommendations on SDH from ITU-T & ETSI.
Ordyn 1140: STM-1 CPE
The Ordyn 1140 is a feature rich, next generation SDH STM-1 Add/Drop Multiplexer with Ethernet over SDH support in a compact or wall/rack mountable 19" by 1U form factor chassis. A typical configuration of the Ordyn 1140 is to provision 21E1s with 1E3/DS3. Minimum configurations can support 4E1 or 4 Ethernet ports.
All features of a full-fledged ADM such as virtual concatenation, fully non-blocking any port to any port cross-connect at up to VC-12 level including tributary to tributary and broadcast connections, hold-over clocks, SNCP-N based ring protection and engineering order-wire are supported.
Features:
•
Optical line interface using SFP modules at 155.52 Mbps as per ITU-T G.957
•
Electrical line interface at 155.52 Mbps as per ITU-T G.703
•
Supports 10/100BaseT, 100BaseFX Ethernet
•
E1 interface as per ITU-T G.703 (120 ohm)
•
Tributaries and interfaces including power supply offer front access for easy provisioning
•
Supports 1310nm and 1550nm on a single mode fiber
•
No forced cooling
•
Suitable for FTTB applications
•
Multiplexing and Demultiplexing comply to ITU-T G.707
Ordyn 1230: STM -1/4 Multi ADM
The Ordyn 1230 Multi-Service ADM/TM/Regenerator- STM-1 /4 is a carrier class product used for telecommunication transmission networks based on the standards and recommendations on SDH from the ITU-T and ETSI.
The Ordyn-1230 is a second generation SDH product using state-of-the-art technology to integrate Add/Drop Multiplexer (ADM), Terminal Multiplexer (TM) and Regenerator (REG) on a single module giving VC-4, VC-3 and VC-12 cross-connect. This product can terminate two STM-1 rings and can work as a digital cross-connect with a capacity of 6 x STM-1 (12 x VC4 option for STM-4 support) equivalent cross-connects.
Features:
•
Upgradeable modular system
•
Optical line interface using SFP modules at 622.08 Mbps or 155.52 Mbps
•
Electrical line interface at 155.52 Mbps as per ITU-T G.703
•
Supports GFP mapped 10/100BaseT, 100BaseFX Ethernet using virtual concatenation and LCAS, L2 Switching with Q in Q
•
E1 interface as per ITU-T G.703 (120R)
•
E3 (34 Mbps) and DS3 (45 Mbps) interface are software configurable
•
Fully non-blocking cross connect of ports with a granularity of VC12
•
Long and short haul capacity
Ordyn 6633: STM -16 Multi ADM
The Ordyn-6633 is a feature rich next generation SDH STM-16 Multiple Add/Drop Multiplexer with fully non-blocking any port to any port cross connects up to VC12 level,
TDM as well as packet tributary interfaces. Aggregate data rates are 155.52 Mbps (STM-1), 622.08 Mbps (STM-4) and 2488.32 Mbps (STM-16). Tributaries can be added using hot plug-in modules. This product supports integrated engineering order wire &
auxilliary data channels. The Ordyn-6633 supports user data channels for auxiliary
data networking by the service provider and metro core availability.
Features:
•
Network Topologies such as Point To Point, Line, Tree, Ring, HUB and MESH Configurations
•
Regenerator [REG], Terminal Multiplexer [TM] or Add/Drop Multiplexer [ADM] or Multi Add Drop Multiplexer [MADM]
•
Completely non blocking cross connect capacity of 128 VC-4 x 128 VC-4 with VC-12, VC-3 & VC-4 granularity
•
Optional 20 Gbps cross connect up to VC-12 level available for DXC applications
•
STM-4/16 optional field upgradability
•
Sub-Network Connection Protection
•
SNC- N) at VC-4, VC-3 and VC-12
•
Line Protection: MSP and MS-SPRING
•
WDM support on Aggregate Interfaces
•
Redundancy available for Power Feed, Cross Connect, Synchronization, Control Modules and Tributary units
•
Carrier class redundancy for all core modules to support critical network applications
•
10/100/1000 Mbps Ethernet Interfaces with GFP and VCAT. Allows hitless bandwidth adjustment based on LCAS
•
Supports Storage Area Networking (SAN) interfaces like FICON, ESCON & FC
•
Supports DVB-ASI
•
Optional support for Ethernet Services like Ethernet Private Line (EPL)/ Ethernet Private LAN (EPLAN)/ Ethernet Virtual Private Line (EVPL)/ Ethernet Virtual Private LAN (EVPLAN)
•
Optional 20 Gbps Layer 2 Switching for Ethernet traffic for efficient usage of SDH bandwidth
•
Tandem Connection Monitoring as per ITU-T G.707 (Optional)
•
Remote software download, configuration backup and restoration of network
•
Holdover for over 24 hours, Free Run and SSM (Synchronization Status Message)
•
support Management functions as per ITU-T G.784
OrdynView 200: EMS
The OrdynView 200 Element Management System provides a centralized network management solution for multi-technology network elements from a single platform. The OrdynView 200 can perform OAM&P on all network elements from a central Network Operations Center. It features a modular architecture that provides support for adding plug-ins for new services, comprehensive FCPS features, advanced provisioning, topology discovery, inventory and software management and a composite network view.
NGT Solutions (M) Sdn Bhd (479129-P)
Suite C-204 Glomac Business Centre, 10 Jalan SS6/1, Kelana Jaya
47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia
